Navigation:  The Main Screen > Information Panel > PCT-3000 plus > PCT-3000 Plus Output Configuration

The output configuration screen is shown above. For each output we have the corresponding name, HP capacity, percentual capacity (in case of master/slave grouping), amount of working time, a button to reset the output timer, the output reverse mode indicator, the output status (ON/OFF) and a button to set/remove the output maintenance status.

Select the desired output in the list and use the lower part of the screen to change the required output configuration settings. Click the Modify button to validate the new output configuration after changing the settings.

After changing the output values, click the OK or Apply button to save the changes you have made. Click Close or press the ESC key at the keyboard to exit the screen.

 

 

---

See Also

 Panel

 Setup

 Alarms

 Other Instruments