Painel of the RT-607Ri plus |
  
|
Painel of the RT-607Ri plus |
|
Below, we have the information panel for the RT-607Ri plus.
On the panel's upper left corner, as we can notice, is the instrument status indication, followed by the Event field, which indicates whether the EVENT output is Manually or Automatically enabled and, right below, the instrument's internal Time and Day.
Below these three indications we find the information on the instrument's alarm which indicates whether the sensor is damaged, short-circuited, open or, even, that the temperature is out of range. If the alarm is activated, the indication point on its side will become yellow.
The instrument's display representation is on the side of the previously referred items. The display can also indicate the instrument status, and when the display shows "N/R" it will be indicating that the concerned instrument is not responding. You may observe that the instrument's status will be indicating Fault or Disconnected. If the instrument's status indicates Maintenance, the display will only show "- - -".
On the side of the display's representation there is the thermostat's status indicator outputs (THERM) and the Events output (EVENT). When a red sign appears in the corresponding space, it will indicate that this is ON.
The setpoint of the temperature and the control differential (hysteresis) can be seen right below the thermostat's status indication.
On the right side of the panel we have a description of the model and, below this, a space for your company's logo.
In the case of the EtM function with a value greater than zero (0), the Manual Event On button will appear on the side of the Setup button, in order for the event to be manually turned on and off by the Sitrad, as shown in the image below.
See Also
URL of this page