Alarms of the PWR-3200 plus |
  
|
Alarms of the PWR-3200 plus |
|
Alarm number 1 indicates that there was an error reading the voltage or current. To discover in which phase the error occurred, click on the alarm text.
Alarm 2 indicates that phase sequence is reversed.
Alarms number 3 and 4 indicates that a power factor or demand alarm occurred respectively.
Alarm number 5 indicates that the internal memory of the instrument used by the data logger is full or has corrupt samples. In this case, load the data from the instruments data logger to the Sitrad and clean the memory.
See Also
URL of this page