Painel of the MT-530 plus |
  
|
Painel of the MT-530 plus |
|
Below, we have the information panel for the MT-530 plus.
As we can see, the indication of the status of the instrument are in the upper left hand corner of the panel.
Below the indication of the status, we find the information referring to the alarms for the instrument. If any of them are activated, the indication light on the side of the alarm will turn yellow.
Right below the alarms, we have the indication of the time that the humidity gauge has been on and the time that it off, as configured in functions F14 and F15.
Beside of the indications cited above, is the representation of the instrument's display. It simultaneously shows the temperature of sensor 1 and the humidity (sensor 2). The display may also indicate the status of the instrument, when the display shows "N/R", it will be indicating that the instrument in question is not responding. You can see that the status of the instrument will be indicating "Failure" or "Disconnected". If the status of the instrument indicates "Maintenance", the display will simply show "- - -".
Beside of the representation of the display for the instrument, we can see the setpoint of the temperature, the control differential for the temperature, setpoint of the humidity and the control differential for humidity.
Beside of the items cited above, we have the indicators of the state of the instrument outputs: THERM and HUMID. When a red light appears in the space corresponding to the output, this will indicate that it is on. The outputs activated indicate the following:
- THERM: the thermostat is on;
- HUMID: the humidity gauge is on.
On the right side of the panel we have a description of the model and, below that, the space for your company's logo.
Also on the panel, you find the button Setup to access the functions of the instrument. It will be necessary to provide the access code for this purpose.
See Also
URL of this page