HUMITECH Super Panel |
  
|
HUMITECH Super Panel |
|
The upper left panel corner displays the device status and the device’s internal date.
Below the status indication is the device alarm data. If any alarm is activated, the corresponding LED lights-up in yellow.
Next to the panel sections mentioned above is the device display. It shows simultaneously the average temperature, sensor 1/sensor 2 temperatures and room humidity. The display can also show the device status. When “N/R” is displayed, the device is not responding. In this case, the status will be “Failure” or “Disconnected”. If device status shows “Maintenance” then “- - -” is displayed.
Below the display section is the data related to the program that the controller is running (in case it is configured to run programs). To restart the program, click the green arrow button. When the program batch is finished the message “Batch Finished!” appears in this section.
Beside the device display the data from the device datalogger can be read. The first piece of data is the datalogger status (ON/OFF) together with the button to turn it ON or OFF. Below the button is the datalogger percentage being used or “- - -” if the datalogger is in the circular buffer mode. There is also a button for loading the data stored by the datalogger and another button for clearing the memory.
Next to the datalogger section is the status for each device output. The output is ON if the corresponding rectangular indicator lights-up in red.
Beside the output indicator section is the model name and underneath a free space is available for the company logo.
The panel also includes the Setup button for accessing device parameter settings. An access code is needed.
See Also
URL of this page