AutoPID plus Panel |
  
|
AutoPID plus Panel |
|
Below, we have the information panel for the AutoPID plus.
In the upper left corner of the panel we can see the device status indication, displaying the process the device is performing at the moment.
Below the status indication we can find the device alarm data. If an alarm is activated its indicator LED becomes yellow.
Beside the items above mentioned we can find the device display. It shows simultaneously the sensor temperature and the percent of voltage applied to the proportional output. The display can also indicate the device status. When “N/R” is displayed, that means the device chosen is not responding. In this case the device status will indicate “Failed” or “Disconnected”. If the device status indicates “Maintenance”, only ‘- - -’ will be displayed.
The panel shows the Control Temperature (setpoint) below the display image.
On the right side of the panel there is a model description and below it, an area for your company logo.
The panel also contains the Setup button to access the device functions and the AutoTune button to start tuning automatically. An access code is required.
See Also
URL of this page