Painel of the AHC-80 plus |
  
|
Painel of the AHC-80 plus |
|
Below, we have the information panel for the AHC-80 plus.
As you can see, in the upper left hand corner there is the indication of the status, indicating the operational state of the instrument at that moment.
Below the indication of the status, we find the information referring to the alarms for the instrument. If any of them are activated, the indication light on the side of the alarm will turn yellow.
Below the information of the alarms, we have the indicators of the state of the instrument outputs: ST1 and ST2. When a red light appears in the space corresponding to the output, this will indicate that it is on. The outputs activated indicate that the stage related to it is active. The configuration of how each output will go is performed by the setup of the instrument.
Beside of the three items cited above, is the representation of the instrument's display. It simultaneously shows the relative humidity, which is most prominently displayed, the temperature of the sensor for the dry bulb and the temperature of the sensor for the wet bulb. The display may also indicate the status of the instrument, when the display shows "N/R", it will be indicating that the instrument in question is not responding. You can see that the status of the instrument is indicating "Failure" or "Disconnected". If the status of the instrument indicates "Maintenance", the display will simply show "- - -".
Beside of the representation of the display, we can see the operating mode, the setpoint and the differential (hysteresis) for the first stage, and right below it, for the second stage.
On the right side of the panel we have a description of the model and, below that, the space for your a company's logo.
Also on the panel we have the Setup button to access the functions of the Setup. It will be necessary to provide the access code for this purpose.
See Also
URL of this page