HPC-01 Alarms |
  
|
HPC-01 Alarms |
|
Alarm number 1 indicates that a sensor is damaged, short-circuited, open-circuited or the temperature is outside the sensor operating range. To check which sensor is faulty click the alarm text.
Alarm number 2 indicates utility power supply voltage reading error.
Alarm number 3 indicates water flow failure.
Alarms number 4 and 5 indicate the pressure is outside the limits permitted for compressors 1 or 2, respectively. To know if the pressure is below or above the permitted range limits, click over the alarm text.
Alarm number 6 indicates the utility power supply voltage is outside the permitted range limits. To know if the power supply voltage is below or above the permitted range limits, just click over the alarm text.
Alarm number 7 indicates the controller is locked due to any error and waits for a manual reset.
Note: The temperature limits alarm for the water and defrost sensors must be informed as a virtual alarm by clicking the Virtual button. To know more about using the virtual alarms, select the subject Using Virtual Alarms.
See Also
URL of this page