Panel of the PCT-210Ri LOG |
  
|
Panel of the PCT-210Ri LOG |
|
Below, we have the information panel for the PCT-210Ri LOG.
As you can see, on the upper left-hand corner of the panel there is an indicator of the instrument's mode of operation.
Below the indication of the operating mode, we find the information referring to the alarms for the instrument. If any of them are activated, the indication light on the side of the alarm will turn yellow.
At the right side of this indication the device LED display is represented. It shows the sensor pressure and below it the analog output value is displayed. The display may also indicate the status of the instrument, when the display shows "N/R", it will be indicating that the instrument in question is not responding. You may observe that the status of the instrument will be indicated "Failure" or "Disconnected". If the status of the instrument indicates "Maintenance", the display will simply show "- - -".
Below the representation of the display, we can see the indication of the setpoint of the pressure and the control differential (hysteresis).
Beside the LED display indication we have the device output status indicators: OUTPUT and ALRM. A red indication means the corresponding output is activated.
Below the outputs, you will see the Parameters button to access the instrument's functions. Next you will see the percentage of the datalogger's internal memory in use, unless it is configured in the rotative memory mode. Below this, you will find a status indicator showing if the datalogger is on or off and a button to activate or deactivate it. There is also a button to load the data stored by the datalogger and another to clean its memory.
On the right side of the panel you will see the description of the model and below that, room for your company's logo.
See Also
URL of this page