Painel of the MT-543Ri plus |
  
|
Painel of the MT-543Ri plus |
|
Below, we have the information panel for the MT-543Ri plus.
As we can see, the information concerning the stages of the instrument are in the left hand corner of the panel. The information will be adapted to the operating mode of the stage.
Beside of the indications cited above, is the representation of the instrument's display. It shows the temperature of the sensor. The display may also indicate the status of the instrument, when the display shows "N/R", it will be indicating that the instrument in question is not responding. You may observe that the status of the instrument will be indicated "Failure" or "Disconnected". If the status of the instrument indicates "Maintenance", the display will simply show "- - -".
Below the representation of the display, we have the status and the operating range of the Buzzer.
Beside of the representation of the display, we have the indicators of the state of the instrument outputs: OUT1, OUT2, OUT3 and BUZZ. When a red light appears in the space corresponding to the output, this will indicate that it is on.
Right below the output indicators, we find the information referring to the alarms for the instrument. If any of them are activated, the indication light on the side of the alarm will turn yellow.
Also on the panel, you find the button Setup to access the functions of the instrument. It will be necessary to provide the access code for this purpose.
See Also
URL of this page