HUMITECH Super Panel Version 3 |
  
|
HUMITECH Super Panel Version 3 |
|
The upper left panel corner displays the device status and the device’s internal date.
Next to the indicators mentioned above you will see a representation of the instrument's display. It simultaneously shows the temperatures of sensors 1, 2 and 3, as well as the room temperature and differential pressure. The display can also show the device status. When “N/R” is displayed, the device is not responding. In this case, the status will be “Failure” or “Disconnected”. If device status shows “Maintenance” then “- - -” is displayed.
Below the representation of the instrument's display you will see the status of the instrument's outputs. If the respective rectangle is red, that means the output is on.
Below the instrument's outputs is the data related to the program that the controller is running (in case it is configured to run programs). To restart the program, click the green arrow button. When the program batch is finished the message “Batch Finished!” appears in this section.
Next to the information regarding the current programming you will see the information regarding the instrument's datalogger. Here, the first information you will see is the status indicating if datalogger monitoring is on or off, and a button to load the stored data, deactivate it or clean the data from the memory. Right above these you will see the indicator showing what percentage of the datalogger's memory is in use, or "---" if the datalogger is in rotative mode.
On the right side of the panel you will see the description of the model and below that, room for your company's logo.
The panel also includes the Setup button for accessing device parameter settings. An access code is needed.
See Also
URL of this page