Painel of the MT-512Ri plus |
  
|
Painel of the MT-512Ri plus |
|
Below, we have the information panel for the Mt-512Ri plus.
We have the status indication of the instrument on the top left-hand corner of the panel.
Below the indication of the status, we find the information about the alarm for the instrument that indicates the sensor is damaged, shorted out, open or further, that the temperature is out of range. If the alarm is activated, the indication light on the side will turn yellow.
Beside of the items cited above, is the representation of the instrument's display. It simultaneously shows the temperature of the sensor and the time of the timer. The display may also indicate the status of the instrument, when the display shows "N/R", it will be indicating that the instrument in question is not responding. You can see that the status of the instrument is indicating "Failure" or "Disconnected". If the status of the instrument indicates "Maintenance", the display will simply show "- - -".
Beside of the representation of the display, we have the indicator of the state of the thermostat (THERM), when a red light appears in the corresponding state, this will indicate that it is on.
Below the indication of the state of the thermostat, we can see the setpoint of the temperature and the control differential (hysteresis).
On the right side of the panel we have a description of the model and, below that, the space for your company's logo.
Also on the panel, we have the buttons Setup and Inv Status to access the functions of the instrument and invert the state (cooling to defrost and vice versa) respectively. It will be necessary to provide the access code for this purpose.
See Also
URL of this page