Alarm 1 indicates that a sensor is damaged, short-circuited, open-circuited or the temperature or humidity is out of the sensor operation range. Click the alarm text to find out which sensor is faulty.

Alarm number 2 shows if the temperature of sensor 1 is above or below the amount configured in the instrument's parameters. To learn more, click on the alarm's text.

Alarm number 3 shows if the humidity is below the amount configured in the instrument's parameters. To learn more, click on the alarm's text.

Alarm number 4 shows if the differential pressure is above or below the amount configured in the instrument's parameters. To learn more, click on the alarm's text.

Alarm number 5 shows that the battery is being used to keep the controller's basic functions working (measurement and datalogger) due to an energy blackout.

Alarm number 6 informs if the internal memory of the instrument used by the datalogger is full or if the stored data is corrupted. In this case, load the datalogger's data from the instrument onto Sitrad and clean the memory.

See Also

 Painel

 Setup

 Datalogger

 Outros Instrumentos